Added to Cart
Learn more about .
More deals you may like
TRADE PACK DUAL BATTERY TRAY SUIT TOYOTA PRADO 150 SERIES 2009 – EARLY 2015 TURBO DIESEL ALL WITH MANUAL AND AUTOMATIC TRANSMISSIONS p/n WBTY007
This tray is mounted in the pdrivers side front of the engine bay. This tray accepts a 12”( 305mm x 175mm app) battery TO VIEW AN AGM DEEP CYCLE 110AH battery that will fit this tray for HIGH TEMPERATURE under bonnet use CLICK HERE
NEW AND IMPROVED SECOND GENERATION TRAY !
UPGRADE FEATURES INCLUDE:
1, Attractive silver non corrosive plating treatment: Though more expensive than the “gold” colored finish or powercoated finish to produce , This tray looks ( in our opinion ) far better in the engine bay and does not chip with no compromise to the corrosion resistance.
2, Rounded corners on tray folded returns: We have had feedback that while either installing battery trays themselves ( not only ours but also others ) or while trying the manouver the battery into the tray , that the sharp “corners” of the folded returns of the tray have scratched the battery or the person fitting it , so to eliviate this we have rounded corners on tray folded returns during the manufacturing process.
3, Improved top bracket: Along with the tray now having rounded corners , we have also rounded the corners of the top bracket.
4, Longer hold down bolts: As many batteries vary in size vertically and may have obstructions such as caps or vents in the top that require a longer bolt ( either one or both ) , we now supply longer 248mm bolts* with 92mm of thread that overcome this problem.*Note: These bolts will require shortening as the way they are supplied they are too long and will come into contact with the inside of the bonnet or the insulation attached to the underside of the bonnet if left at their supplied length.
5, Bigger diameter hold down bolts: A major flaw in many battery trays is too smaller diameter hold down bolts that can fracture or bend when tightened up .We have upgraded the bolt diameter from 4.5 to 6.5mm to overcome this.
These are a generic branded trade grade battery tray kit. Each model tray goes through stringent engineering, prototype development and vigorous off road testing before being offered to market. Each tray is made from plated steel with high sides, top mounts and a pressed base. Plated steel is resistant to corrosion, relatively light and provides extra strength and support for long term reliability. Each design is created to provide the maximum possible battery size while maintaining strength to keep the battery in place, even through the toughest 4WD conditions.FEATURES
- Tray fits all Toyota Prado 150 series models from 2009 – early 2015.
- This tray is not recommended to self fit unless you have extensive mechanical experience.
- Instructions are included for the items installation including images where necessary.
- If in doubt about the right tray to purchase for you vehicle contact us first and we will assist.
- *Note Once tray is bolted in, ensure adequate clearance on all A/C pipes, radiator support panel & rear of engine bay.
TO VIEW THE INSTRUCTION MANUAL CLICK HERE
TO VIEW AN AGM DEEP CYCLE 110AH battery that will fit this tray for HIGH TEMPERATURE under bonnet use CLICK HERE
Related CategoriesHardware & Hand ToolsCar AudioDash CamsCables & AdaptersPower Tools & AccessoriesGarden Power ToolsGPS DevicesMeasuring ToolsRemotesComponentsAutomotive AccessoriesBatteriesTorches & Outdoor LightingHolders & StandsUSB ChargersBreathalysersCar ElectronicsHandsfree SpeakerphonesStorageLaddersPools & Swimming