Fuel Pump Vacuum Tester Gauge Car Carburetor Carb Valve Pressure Test Tool kit

Brand New.

This pressure gauge set can be used to test fuel pump pressure, emission control devices, leaky, stuck open or burnt valves. Clogged muffler, turbo or exhaust system. Helps to locate leaks in the gas line, valve timing, worn out rings and seals, heating and air conditioning components.

Also can be used for testing engine vacuum lines, brake assist system, carburetor and intake manifold for leaks, vacuum or pressure loss. Set includes a variety of adapters suitable for most vehicles; Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar).

The gauge has 4 inches diameter large scale, color-coded measurement, rubber surrounded protective and a hook on the top. so it’s easy to read and use.

NOTE: The dial may not point to 0 when you receive the item or after a long time of use. Adjusting the gauge is s a normal operation. Please follow these steps: 1.Remove the rubber coat from the gauge. 2.Use a flat screwdriver to lift the upper half of the gauge. You can lift a little bit from one side and then from opposite direction. 3.After remove the upper half, please use a screwdriver to adjust the screw on the face of the gauge and set the arrow to 0.