Aten 2 Port USB 3.0 4K Dual DisplayPort KVMP Switch (CS1942DP)

GENERAL

Computer Connections

2

Port Selection

Hotkey, Pushbutton, Mouse, RS-232 Commands

CONNECTORS

Console Ports

2 x USB Type A Female
2 x DisplayPort Female (Black)
2 × 3.5mm Audio Jack Female (Green; 1 x front, 1 x rear)
2 × 3.5mm Audio Jack Female (Pink; 1 x front, 1 x rear)

KVM (Computer) Ports

2 x USB3.1 Gen1 Type B Female (Blue)
4 x DisplayPort Female (Black)
2 × 3.5mm Audio Jack Female (Green)
2 × 3.5mm Audio Jack Female (Pink)

Daisy Chain Ports

1 x RJ-45 Female

Power

1   x DC Jack

USB Hub

2 x USB3.1 Gen1 Type A Female (Blue; 1 x front; 1 x rear)

LEDS

KVM

3 (Orange)

Audio

3   (Green)

USB Link

3 (Green)

SWITCHES

Selected

3 x Pushbutton

Station Selection

1   x Slide Switch

EMULATION

Keyboard / Mouse

USB

Video

Up to 4096 × 2160 60Hz, 2560 x 1440 144Hz

Scan Interval

1-99   seconds (default: 5 seconds)

Power Consumption

DC12V:3.48W:73BTU

ENVIRONMENTAL

Operating Temperature

0–50°C

Storage Temperature

-20–60°C

Humidity

0-80% RH, Non-condensing

PHYSICAL PROPERTIES

Housing

Metal

Weight

1.54 kg ( 3.39 lb )

Dimensions (L x W x H)

33.50 × 15.66 × 4.40 cm
(13.19 × 6.17 × 1.73 in.)

Note

For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

OTHERS

Notes

As is common with DisplayPort KVM switches, switching between KVM ports in an Extended Desktop setup may cause windows open on the extended desktop to be resized/repositioned back to a default   configuration on the main display. This is due to the nature of the DisplayPort protocol and may require a manual readjustment.

1.DisplayPort Dual–Mode technology (DP++) does not require an active adapter for most single display setups. Active DisplayPort adapters are recommended if you are unsure of the video source's DP++ compatibility.

2.MST (Multi-Stream Transport) requires either monitors that are capable of DisplayPort 1.2 daisy-chaining, or use of a powered DisplayPort MST Hub. A DisplayPort v1.1a display can be the last   display in a DisplayPort v1.2 chain. The PC source must be DisplayPort 1.2 compliant

3.For DisplayPort 1.4 compliant display device, make sure to configure the device setting to be compatible with DisplayPort 1.2 to avoid compatibility issue.

4.HD audio through DisplayPort cannot be switched independently