Ubiquiti Unifi USW-Pro-Max-24-PoE 26-Port 10G L3 Managed Etherlighting PoE

Ubiquiti Unifi USW-Pro-Max-24-PoE 26-Port 10G L3 Managed Etherlighting PoE Switch (400W) – SFP+ x2, 2.5GbE PoE++ x8, 1GbE PoE++ x8, 1GbE PoE+ x8

A 24-port, Layer 3 Etherlighting™ switch with 2.5 GbE and PoE++ output.
Etherlighting™ ports that illuminate to indicate port location, speed/link, and native VLAN/network*
- (8) 2.5 GbE PoE++ ports
- (16) GbE ports including (8) PoE+ and (8) PoE++
- (2) 10G SFP+ ports
- DC power backup ready
- 400W total PoE availability
- Managed with UniFi Network 8.0.24 and later

Mechanical
Dimensions
442 × 325 × 44 mm (17.4 × 12.8 × 1.7”)
Weight
Without mounting brackets: 5.1 kg (11.3 lb)
With mounting brackets: 5.2 kg (11.5 lb)
Enclosure material
SGCC steel
Hardware
Management interface
Ethernet In-Band
Networking interface
(16) GbE RJ45 ports
(8) 1/2.5 GbE RJ45 ports
(2) 10G SFP+ ports
PoE interface
(8) PoE/PoE+ (Pins 1, 2+; 3, 6-)
(16) 60W PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-)
Total non-blocking throughput
56 Gbps
Switching capacity
112 Gbps
Power method
(1) Universal input, 100—240V AC, 50/60 Hz
(1) USP-RPS DC input
Power supply
AC/DC, internal, 450W
Supported voltage range
100—240V AC
Max. power consumption
50W (Excluding PoE output)
Total available PoE
400W
Max. PoE wattage per port by PSE
PoE: 15.4W
PoE+: 30W
PoE++: 60W
Voltage range PoE mode
PoE: 44—57V
PoE+: 50—57V
LCM display
(1) 1.3” touchscreen
Button
Factory reset
Ambient operating temperature
-5 to 40° C (23 to 104° F)
Ambient operating humidity
10 to 90% noncondensing
Certifications
CE, FCC, IC
Switching Features
Layer 2 features
IGMP snooping
STP / RSTP with priorities and port-level disable
Port isolation
Storm control
Voice VLAN
Port mirroring
LACP port aggregation
Multicast / broadcast rate limiting
MAC address blocking
Flow control
802.1X control
Jumbo frames
Proprietary loop protection
DHCP snooping / guarding
Egress rate limit
LLDP-MED
Port restricted by MAC
Device isolation with ACLs
Layer 3 features
DHCP for locally-managed networks
DHCP relay
Inter-VLAN routing between networks on same switch
Static routing between local networks
Network isolation with ACLs
Etherlighting™
Ethernet
Locating
Speed/link
Native VLAN/network
SFP+
Locating
Speed/link
Native VLAN/network
LEDs
System
Status
RPS
Status
Application Requirements
UniFi Network
Version 8.0.24 and later

Please note that this item is located outside Australia. Product complies with Australian standards.